Pipe Freeze Pro

Pipe Heat Tape Kit to Protect Your Pipes from Freezing down to -40ºF: Dry Locations Only

Pipe Freeze Pro is an 8mm self-regulating heat cable that generates 3-5watts per foot, making it a perfect choice for typical indoor residential pipe freeze prevention projects. The built-in thermostat triggers the cable to turn on at 37ºF and off at 50ºF, which prevents wasting unnecessary electricity by only energizing the cable when it’s needed. Pipe Freeze Pro can be overlapped without risk of shorting or fire.

No need for a ThermaCord: PipeFreezePRO has a built-in thermostat

$31.96$255.96

SKU: 3PFP-1-000 Category: Tag:
5/5

“Heat Tape Pro did exactly what I needed it to do. Now I don’t have to worry about water leaking into my house, because I can tell when it’s working by the little light on the end of the cable.”

-Michael P.
Amazon Customer

4/5

“This heat tape works as advertised. It was delivered to me fast, and although it’s a little complicated to install, the documentation is good..”

-Shaun D.
Radiant Solutions Customer

5/5

“I install thousands of feet of heat tape every year. This is the best stuff I’ve found to protect my customers homes and give them the piece of mind they need.”

-Patrick B.
Professional Installer

More About Pipe Freeze Pro

Dry Locations Only

Our Plug-in Pipe Freeze heat tape Kit is designed for residential and commercial pipe freeze protection on pipes made from both metal (copper & steel) and plastic (ABS, PVC, PEX). Our cables are self-regulating, so they only ask for the power they need to heat the pipe above freezing. This saves you a lot of money in the long run by not wasting electricity like constant wattage Pipe Trace heat tape. Kits include heat tape, high-temp fiberglass tape to affix cable to pipe, awesome installation manual and electric warning labels.

Simply plug the cable into any GFCI 120V receptacle (can also be plugged into a standard outlet as long as the circuit is GFCI protect). Pipe Freeze Pro details:

    • Self-Regulating , Includes a built-in Thermostatic Switch to control power to heat tape – The cable Automatically turns on and off, then regulates its temperature and power consumption, optimizing for the surrounding temperature. This uses less energy and save you money. The built-in thermostatic switch has a 4ºF +/- temperature sensitivity.
    • Since temperatures modulate, Pipe Freeze Pro will not overheat, or pose a risk of fire like other heat tape. Pipe Freeze Pro can overlap and touch itself. Standard heat tape can not do this.
    • Produces 3 watts per foot (at 50ºF) and 5 watts per foot (at 32ºF) and below.
    • Suitable for metal or plastic pipes up to 6″ for pipe heat tracing applications.
    • 40″ Cold lead plug-in cord
    • UL listed for use in Dry Locations
    • 10-year manufacturer’s warranty

IMPORTANT NOTES: Pipe Freeze Pro is not designed to thaw already frozen pipes, for exposure to wet environments, for installation inside pipes and drains or for burial. You must cover heat cable with insulation for it to work. Do not use this cable for applications other than pipe freeze protection.

Pipe Freeze Pro FAQs

The short answer is NO. Self-regulating heat cable does not turn itself on and off automatically. To do that you need to put the cable on a switched circuit or outlet or on a controller. Of course, you can also be old-school about it and simply plug and unplug as needed.

“Self-Regulating” refers to the fact that these cables are temperature sensitive. Due to their construction, these cables sense changes in temperature along their entire length, demanding more power as temps fall and less when they rise.

PipeFreeeze Pro™, Pipe Freeze Protection Solution has a built in thermostatic switch, meaning it will turn on and off on it’s own.

Heat Tape Pro™, does not contain a built-in thermostatic controller. We recommend adding the ThermaCord™ Thermostatic controller to turn your Heat Tape PRO to turn the cable on and off with changes in temperature.