GC-ESK is a field-installed end seal kit to terminate 120v and 240v self-regulating heating cables after the cable has been installed in position. This kit includes materials for one GlowCap™ End Seal. Works for cables between 11-13mm wide.
Original price was: $24.95.$22.95Current price is: $22.95.
898 in stock
It’s a common question that the GlowCap™ End Seal Kit was designed to answer from a distance. If the green indicator light is on, your cable is working. Installing the GlowCap™ End Seal kit on self-regulating heat cable takes about five minutes total. The kit includes a 12” section of 6 watt HeatTapePro™ Self-Regulating Heat Cable that is factory terminated with a GlowCap™, which is an injection molded body with an embedded 100,000 hour UL-Listed LED. The other end of the assembly is prepared and ready to be crimped onto the stripped end of any 10-13mm self-regulating heat cable.
The GC-ESK increases system reliability significantly because cable function can be verified in seconds with a quick glance at the GlowCap™. This is particularly helpful on cable systems that are inaccessible, such as on high locations
“Heat Tape Pro did exactly what I needed it to do. Now I don’t have to worry about water leaking into my house, because I can tell when it’s working by the little light on the end of the cable.”
-Michael P.
Amazon Customer
“This heat tape works as advertised. It was delivered to me fast, and although it’s a little complicated to install, the documentation is good..”
-Shaun D.
Radiant Solutions Customer
“I install thousands of feet of heat tape every year. This is the best stuff I’ve found to protect my customers homes and give them the piece of mind they need.”
-Patrick B.
Professional Installer
Including a thermostatic heat tape switch or controller in your installation will cut power to your heat tape in times it is not needed. This will lessen your environmental footprint and save you money.
Savings will always depend on the weather and how often you have temperatures above the threshold that the switch turns on your heat cable. In most situations where heat cable is needed, savings will offset the cost of the ThermaCord and then some.
Radiant solutions has developed several accessories and installation components that work well for flat and low-pitch roofs. Installing heat tape on a flat roof often requires more unique considerations than standard serpentine patterns used on pitched roofs.
Check out our Case Studies for examples of Heat Tape installations, including information on flat roofs.
Also refer to the Heat Tape Pro Product Manual for information on flat roof installations of heat tape.
The short answer is NO. Self-regulating heat cable does not turn itself on and off automatically. To do that you need to put the cable on a switched circuit or outlet or on a controller. Of course, you can also be old-school about it and simply plug and unplug as needed.
“Self-Regulating” refers to the fact that these cables are temperature sensitive. Due to their construction, these cables sense changes in temperature along their entire length, demanding more power as temps fall and less when they rise.
PipeFreeeze Pro™, Pipe Freeze Protection Solution has a built in thermostatic switch, meaning it will turn on and off on it’s own.
Heat Tape Pro™, does not contain a built-in thermostatic controller. We recommend adding the ThermaCord™ Thermostatic controller to turn your Heat Tape PRO to turn the cable on and off with changes in temperature.
Radiant Solutions products, including Ice Dam Prevention products such as Heat Tape Pro and Pipe freeze Prevention products like Pipe Freeze Pro can be purchase here at this website or at Amazon.com.
Check out our full list of Frequently Asked Questions on our FAQ Page.
Take a Look at Our Heat Tape Installation Case Studies
Learn a Bit about Ice Dams and How & Why they Form
