Pipe Freeze Pro is an 8mm self-regulating heat cable that generates 3-5watts per foot, making it a perfect choice for typical indoor residential pipe freeze prevention projects. The built-in thermostat triggers the cable to turn on at 37ºF and off at 50ºF, which prevents wasting unnecessary electricity by only energizing the cable when it’s needed. Pipe Freeze Pro can be overlapped without risk of shorting or fire.
No need for a ThermaCord: PipeFreezePRO has a built-in thermostat
Price range: $18.99 through $159.99
Our Plug-in Pipe Freeze heat tape Kit is designed for residential and commercial pipe freeze protection on pipes made from both metal (copper & steel) and plastic (ABS, PVC, PEX). Our cables are self-regulating, so they only ask for the power they need to heat the pipe above freezing. This saves you a lot of money in the long run by not wasting electricity like constant wattage Pipe Trace heat tape. Kits include heat tape, high-temp fiberglass tape to affix cable to pipe, awesome installation manual and electric warning labels.
Simply plug the cable into any GFCI 120V receptacle (can also be plugged into a standard outlet as long as the circuit is GFCI protect). Pipe Freeze Pro details:
IMPORTANT NOTES: Pipe Freeze Pro is not designed to thaw already frozen pipes, for exposure to wet environments, for installation inside pipes and drains or for burial. You must cover heat cable with insulation for it to work. Do not use this cable for applications other than pipe freeze protection.
“Heat Tape Pro did exactly what I needed it to do. Now I don’t have to worry about water leaking into my house, because I can tell when it’s working by the little light on the end of the cable.”
-Michael P.
Amazon Customer
“This heat tape works as advertised. It was delivered to me fast, and although it’s a little complicated to install, the documentation is good..”
-Shaun D.
Radiant Solutions Customer
“I install thousands of feet of heat tape every year. This is the best stuff I’ve found to protect my customers homes and give them the piece of mind they need.”
-Patrick B.
Professional Installer
Including a thermostatic heat tape switch or controller in your installation will cut power to your heat tape in times it is not needed. This will lessen your environmental footprint and save you money.
Savings will always depend on the weather and how often you have temperatures above the threshold that the switch turns on your heat cable. In most situations where heat cable is needed, savings will offset the cost of the ThermaCord and then some.
This includes, but is not limited to:
The type of roof you have determines the roof clips and accessories needed. Check out our Heat Tape Installation Accessories.
We are building a hand guide to identify what kind of roof you have and find the clips that can/should be used with that roof-type.
View the Guide Explaining What Clips You Need Here
We have a guide on How to Measure for Purchasing Heat Tape that will help you. Once you have your measurements, you can find our Heat Tape Calculator here.
The terms heat cable, heat tape and heat trace are all used interchangeably to described heated cables used to protect pipes from freezing, preventing roof and gutter ice dams from forming and for safeguarding temperature sensitive components.
Other terms we’ve seen used regarding Heat Tape are:
Heat Tape Pro has the most comprehensive installation system that works on almost any kind of roof type.
For information about installing Heat Tape Pro on a Natural Slate Roof, Click here.
For information about installing Heat Tape Pro on a Synthetic late Roof, Click here.
We have a calculated rate based on the product in your cart if you choose to ship to Canada or Alaska.
More can be found here.
Heat Tape Pro and Pipe Freeze Pro are offered in many lengths from 6-foot up to 150-foot. These products are not designed to be modified, so you should pick the length you need and work with that length. These cables should not be altered and doing so would void any warranty on the product.
We offer heat tape on spools from 250-foot to 1000-foot. These spools are designed to be cut to length, made into multiple cables, etc. Heat Tape on spools needs to be hard-wired into a junction box, or have a power connection plug-in manually added to it for use. It also requires ends to be properly sealed and terminated. When working with Heat Tape on spools, a Licensed Electrician should be utilized to assure proper wiring per regional codes and standards.
We are frequently restocking products and the one you need will soon be available. You can make a request to be notified when out of stock items are re-stocked.
Click Here to Submit your information to be notified of a Products Restock
Check out our full list of Frequently Asked Questions on our FAQ Page.
Take a Look at Our Heat Tape Installation Case Studies
Learn a Bit about Ice Dams and How & Why they Form
