Articles, Case Studies, Tips & More
The Grip Clip™ is the only heat cable clip in the world that does not threaten the warranty of asphalt shingle roof systems. No nails or adhesives are needed. Grip Clips™ also work well in valleys because the arm of
Historically, there have been two methods for installing heat tape on standing seam metal roofs: 1) Glue clips to the surface or, 2) Use compression-based roof clamps that grip onto the standing seam. The GVG Heat Tape Clip is a
Use the Radiant Solutions Company IDP-113 Nail On Roof Clip to secure heat cable near valleys as illustrated here. Although not the preferred method by most installers, old school contractors still swear by this tried and true roof clip
Typical gutter downspouts on residential homes are either 2″ x 3″ or 3″ x 4″. It’s acceptable to install a single or a double heat cable run in the standard downspout. It’s a good idea to use CableGuard to protect
Typical gutter downspouts on residential homes are either 2″ x 3″ or 3″ x 4″. It’s acceptable to install a single or a double heat cable run in the standard downspout. It’s a good idea to use CableGuard to protect
Below is an illustration to demonstrate two methods of installing heat tape on a flat roof with valleys. This is the first in our series outlining the installation of roof de-icing cable on flat roofs. ‘flat’ roofs will include the
Here is a helpful rendering to show some of the most common areas where heat tape is used for roof and gutter de icing. Click on any of the circled areas to find the product you need. You will be
