MeltLogic is an intelligent Wi-Fi/internet-connected heat tape controller that watches the weather forecast and automatically enables your roof and gutter deicing system when you actually need it, saving you money when you don’t.
$42.50
989 in stock
MeltLogic uses 24/7 forecast monitoring and AI to more efficiently control your heat tape. With the MeltLogic Smart Controller and optional subscription, you can save up to 85% on your heat cable energy costs.
MeltLogic continuously tracks temperature, precipitation, solar irradiance, and forecasts specific to your local area.
Using intelligent algorithms, MeltLogic identifies the exact conditions that lead to ice dam formation.
Automatically activates heat cables only during actual ice risk, dramatically reducing unnecessary energy use.
Energy prices continue to climb, making wasteful continuous heating increasingly expensive.
Manage your home, cabin, vacation property, rental or other properties
(up to 5 properties total)
Control preferences for multiple devices under a single subscription
Set a routine schedule for the cables to run, for extra peace of mind
Take advantage of off-peak hours by choosing when duty cycles run
Automatically activates cables when temps are below 37°F
Continuously monitor the weather and turn cables on only when needed
(additional savings of 50-90%)
Uses other variables like roof exposure direction to maximize savings
Intelligently adjusts duty cycles based on forecasts to maximize savings
Get your subscription fee back if you don’t save more than $65+/yr
(see Terms of Service for details)
No, but we are confident that it will save you money. Without the Annual or Lifetime plans, your device will run on a duty cycle frequency and time that you select. You can also turn your device on/off manually whenever needed. This is better than most traditional heat cables, but is not as efficient as the Annual or Lifetime plans. The paid plans use 24/7 forecast monitoring, estimate the snow load on your roof, take into account the direction of your roof exposure, and more. We are so confident in the value of the paid plans that we have a ‘Savings Guarantee’ where we will refund your Annual Plan subscription amount if you don’t save more than $49 per season, compared to a traditional heat cable system. The Savings Guarantee does not apply to the Lifetime plan.
A single subscription will cover up to 5 properties (e.g. home + cabin + rental property) and up to 10 MeltLogic devices per property. All properties and devices can be conveniently controlled from a single app on your smart phone.
A lot.
Check out the Savings Estimator tool above for more details on your location.
It is common for MeltLogic systems to pay for themselves through savings in a matter of months or just a couple seasons when compared to an always-on or temperature-only based system!
However, the exact amount depends on a number of factors including your climate, the length of heat cables you have, your utility rates, and the settings you customize in the app. Generally, the colder your climate, the longer your cables, and the higher your utility rates, the more savings you will see.
Some users have saved over $1,200/season in energy costs with the MeltLogic Smart Controller and Annual/Lifetime subscription plan! We are so confident in the value of the Annual plan that we have a Savings Guarantee where we will refund your $65/year subscription if you don’t save more than $65 per season, compared to a traditional heat cable system.
Yes! As long as your heat cables use less than 1800 watts and are connected to a 120v circuit, the system can likely be retrofitted with the MeltLogic controller. Most heat cable systems use roughly 8 watts per foot of cable. This means the MeltLogic system can handle roughly a 200ft cable run at that energy usage. However, you should confirm your cables energy usage before installation.
MeltLogic Smart Controllers and cables are designed to accommodate self-installation or professional installation. MeltLogic does not provide installation, but many local contractors or roofers offer professional heat cable installation services for a fee.
If you choose to install the system yourself, we suggest following one of the many online tutorials for heat cable installation. Those guides and videos will explain how to run the cable up your downspout, along your gutters, and then connect the cable to your shingles using the provided shingle clips and hangers. For roofs that do not have shingles, other hardware may be required and can be purchased from many online retailers.
Compared to typical heat cable installation, the MeltLogic system only requires a few additional steps, typically taking less than 5 minutes.
Once your cables are installed, simply plug in your MeltLogic Smart Controller to a 120v GFCI outlet, pair it to your app, and connect it to your cables. The remainder of the configuration is completed via the app.
The entire installation process, including cables, can often be done in a couple of hours.
MeltLogic is designed to work with a number of different roof types from shingles to metal. The heat cables and controller come with clips designed for common shingled roofs. Although the system will still work on other roof types, like metal roofs, additional installation hardware or adhesives may be required. MeltLogic does not sell these items but other online retailers do.
MeltLogic can be used in almost any climate. It works best in regions that experience winter precipitation and temperatures that fluctuate around or below freezing.
Cables should be run along the bottom of your roofline in a zig zag arrangement, through gutters, and down any downspouts. Some people also need ice dam protection around dormers or roof valleys.
Use our Heat Tape Calculator for an estimate.
Proper installation is essential for drainage. When in doubt, consult a professional.
“Heat Tape Pro did exactly what I needed it to do. Now I don’t have to worry about water leaking into my house, because I can tell when it’s working by the little light on the end of the cable.”
-Michael P.
Amazon Customer
“This heat tape works as advertised. It was delivered to me fast, and although it’s a little complicated to install, the documentation is good..”
-Shaun D.
Radiant Solutions Customer
“I install thousands of feet of heat tape every year. This is the best stuff I’ve found to protect my customers homes and give them the piece of mind they need.”
-Patrick B.
Professional Installer
