Roof snow and Ice sensor kit that contains the sensor, the sensor mount, and the remote control. For use with your hard-wired ice dam heat tape. Early detection of snow and ice precipitation and subsequent activation of your heat tape can maximize the effectiveness of your ice dam prevention system.
$718.95
50 in stock
Our PYROSelf Kit SnowFree System is the ultimate all-in-one snow sensor & controller for light commercial and residential use. A “plug and Play” controller for frost protection, as well as ice and snow melt applications. When receiving a signal from the built-in snow sensor, it activates the contactors energizing the heating elements. Based on the configuration and settings, the two outputs to the two zones are activated together or in staggering mode. The outdoor temperature set-point as well as the ambient lower limit temperature can be easily set by the remote control. The Technician Settings mode allows the installer or technician to adjust the parameters for customized installations using the remote control. The adjustable time delay (Hold On) is adjustable in the range of 0 up to 48 hours. Installing the system is a quick and easy task. Apart of mounting the metal box to the wall, the installer needs only to connect the line in and line out wires in the marked terminals and the system is ready to work. Kit includes: the PYROself Sensor, the PYRO bracket and the PYRO remote control.
“Heat Tape Pro did exactly what I needed it to do. Now I don’t have to worry about water leaking into my house, because I can tell when it’s working by the little light on the end of the cable.”
-Michael P.
Amazon Customer
“This heat tape works as advertised. It was delivered to me fast, and although it’s a little complicated to install, the documentation is good..”
-Shaun D.
Radiant Solutions Customer
“I install thousands of feet of heat tape every year. This is the best stuff I’ve found to protect my customers homes and give them the piece of mind they need.”
-Patrick B.
Professional Installer
The complete kit includes three main components: the PYROself snow and ice sensor, the PYRO mounting bracket for secure installation, and the PYRO remote control for easy programming and monitoring. Everything you need to get your automated snow detection system up and running is included in the box.
Yes, this sensor kit is designed to work with your existing hard-wired ice dam heat tape system. The PyroSelf kit acts as an intelligent controller that automatically activates your heat tape when snow or ice conditions are detected, making your current heat tape system much more efficient and effective.
Installation is designed to be straightforward. You'll need to mount the control box to a wall and connect the line in and line out wires to the marked terminals. The system is "plug and play" once the basic wiring connections are made. However, since this involves electrical work, we recommend having a qualified electrician handle the installation.
Yes, the PyroSelf kit features dual-zone capability. You can set it to activate both zones simultaneously or use staggering mode, where the zones activate at different times. This flexibility allows you to customize the system based on your specific roof layout and heating needs.
The system includes an adjustable time delay feature called "Hold On" that can be set anywhere from 0 to 48 hours. This ensures your heat tape continues running for the appropriate amount of time after snow/ice conditions end, providing complete protection while maximizing energy efficiency.
You can easily set both the outdoor temperature set-point (the temperature at which the system becomes active) and the ambient lower limit temperature (the minimum temperature below which the system won't operate). These settings help optimize performance for your specific climate conditions.
The PyroSelf kit is designed for both light commercial and residential applications. Whether you're protecting a home, small office building, or retail establishment, this system provides reliable automated snow and ice detection for properties of various sizes.
The built-in snow sensor continuously monitors for snow and ice precipitation. When these conditions are detected, it automatically sends a signal to activate the contactors that energize your heating elements. The system works in real-time to provide immediate protection when winter weather strikes.
The remote control allows you to easily adjust basic settings like temperature set-points. However, the system also includes a Technician Settings mode that enables installers or qualified technicians to customize more advanced parameters for specialized installations and optimal performance.
The PyroSelf kit is designed to work with hard-wired ice dam heat tape systems. While it's compatible with most standard installations, we recommend consulting with our technical support team to ensure compatibility with your specific heat tape setup before installation.
This kit includes the sensor, mount, and remote control, but NO indoor receiver. You'll need to go outside to the mounted sensor to make adjustments or check status.
If you don't mind going outside occasionally to adjust settings, or if your sensor will be mounted somewhere easily accessible (like a deck or patio), you can save $156.
You need line-of-sight to the outdoor sensor unit to use the remote. No walls, no indoor use - you're operating it from outside near the sensor.
Absolutely! You still get automatic snow detection and temperature-based activation. You just have to step outside to change settings instead of controlling it from your couch.
You'd need to buy the indoor receiver separately, at which point you might as well have bought the Kit X from the start. Choose based on how you actually want to use the system.
The outdoor sensor, mounting bracket, and remote control. Everything you need for automated snow detection, just without the indoor convenience.
People who want automation but don't mind stepping outside occasionally, or those with easily accessible mounting locations who want to save some money.
PipeFreezePRO comes with one or more 30ft rolls of high-quality fiberglass tape, but you can use any tape with a temperature rating of 150º F and above. Self-adhesive aluminum foil tape can be used but avoid standard tapes, including electrical tape and duct tape because they lose their adhesion when exposed to heat. Remember, it’s imperative to cover the pipe/heat tape assembly with pipe insulation (1/2″ minimum thickness). Think four easy steps: 1) cable on pipe, 2) tape on cable, 3) insulation on pipe/cable and 4) tape on insulation.
Pipe Freeze PRO can be overlapped during installation. This is a fundamental advantage of self-regulating heat cable over cheap, constant wattage cable found in hardware stores is that it can be overlapped without risk of shorting out or catching fire. So yes, overlap away!
The amount of heat cable needed for pipe freeze prevention is determined by a couple of simple factors including: Length of pipe, diameter of pipe, distance to power supply and number of valves.
Most of the time, we do not recommend a spiral cable application because it’s simply not necessary. It requires 3x the cable to do the same job.
Therefore, simply use a straight, single run of cable affixed to the bottom of the pipe (think 6 o’clock position) using the provided fiberglass installation tape. Next, add 1 foot of cable for every valve because you will be wrapping the valve with cable. For pipes less than 1″ in diameter, a single cable run is sufficient. For larger pipes, two cable runs are recommended. Keep in mind that plastic pipes are less thermally conductive so you may choose to use two cable runs on larger plastic pipes to be safe. Finally, if your outlet isn’t close to the pipe you are treating, factor in enough heat cable to reach your outlet (Pipe Freeze PRO does come with a 36″ power cord).
Finally, you must install insulation on your pipe and heat cable assembly in order for the system to operate effectively. See instructions for further details.
The cable can be exposed to wetness but the thermostat must stay dry to function properly. Use Pipe Freeze PRO for pipe freeze prevention applications only.
Consider using Heat Tape Pro inside of open drain pipes as that cable is rated for use in wet areas.
We are frequently restocking products and the one you need will soon be available. You can make a request to be notified when out of stock items are re-stocked.
Click Here to Submit your information to be notified of a Products Restock
Heat Tape Pro has the most comprehensive installation system that works on almost any kind of roof type.
For information about installing Heat Tape Pro on a Natural Slate Roof, Click here.
For information about installing Heat Tape Pro on a Synthetic late Roof, Click here.
Pipe Freeze Pro’s integrated thermostat turns power on and off automatically to the cable to save electricity. The thermostat is the lump located between the power cord and the heat cable. The thermostat triggers the cable to turn on at 37ºF and off at 50ºF, with a sensitivity range of +/- 4ºF. It’s a great feature that makes Pipe Freeze Pro unique among heat cables on the market.
Yes and no. The cable is approved for exposure to wet conditions but you should keep the thermostat dry for proper operation.
No. The thermostat need only be exposed to cold air. It does not hurt to have the thermostat attached to the pipe but it is not necessary. If you choose to attach it to the pipe keep in mind that the thermostat should not be covered with insulation.
No. You want the thermostat to react to the cold environment so it triggers the Pipe Freeze Pro to turn on.
Every Length of Heat Tape Pro has a cord length of 10-feet that is not included in the listed/state length. Meaning: A 100-foot Heat Tape pro will have a 100 feet of heated cable + a 10-foot unheated power cord.
Every Length of Pipe Freeze Pro has a cord length of 3-feet (36″) that is not included in the listed/state length. Meaning: A 30-foot Heat Tape pro will have a 30 feet of heated cable + a 3-foot unheated power cord.
Radiant Solutions has the most comprehensive installation system for Heat Tape that exists. We make accessories to install heat tape on almost any kind of roof.
Click here to learn about product specifically for Natural Cedar Roofs
Check out our full list of Frequently Asked Questions on our FAQ Page.
Take a Look at Our Heat Tape Installation Case Studies
Learn a Bit about Ice Dams and How & Why they Form
